2023年4月8日 星期六

香橙派安裝 Debian ,變更SD卡大小

 # Start of filesystem resize task


aprx@OrangePi:~$ sudo fdisk /dev/mmcblk0

[sudo] password for aprx: (enter your user login password press Enter. user must be in sudo group see above.)


Welcome to fdisk (util-linux 2.27.1).

Changes will remain in memory only, until you decide to write them.

Be careful before using the write command.


Command (m for help): d

Partition number (1,2, default 2): 2


Partition 2 has been deleted.


Command (m for help): n

Partition type

   p   primary (1 primary, 0 extended, 3 free)

   e   extended (container for logical partitions)

Select (default p): p

Partition number (2-4, default 2): (press Enter)

First sector (2048-62521343, default 2048): 143360

Last sector, +sectors or +size{K,M,G,T,P} (143360-62521343, default 62521343): (press Enter)


Created a new partition 2 of type 'Linux' and of size 29.8 GiB.


Command (m for help): w

The partition table has been altered.

Calling ioctl() to re-read partition table.

Re-reading the partition table failed.: Device or resource busy


The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8).


# Reboot to apply changes, ready for resize2fs


aprx@OrangePi:~$ sudo reboot


# Now grow/resize root filesystem. No reboot required.


aprx@OrangePi:~$ sudo resize2fs /dev/mmcblk0p2

[sudo] password for aprx: (enter your user login password press Enter. user must be in sudo group see above.)

resize2fs 1.42.13 (17-May-2015)

Filesystem at /dev/mmcblk0p2 is mounted on /; on-line resizing required

old_desc_blocks = 1, new_desc_blocks = 2

The filesystem on /dev/mmcblk0p2 is now 7797248 (4k) blocks long.


Your filesystem should now use all available space on sd card.

*A note on SD Cards with fake capacity.

This is rampant with online vendors, selling cheap micro SD Cards. You probably will not get a replacement.

If you ask for a replacement, they say a new genuine card is sent out but don't and wait out the buyer protection period, but you should try a refund.

In such cases the micro SD Card is only 8gb in capacity, or less. You can still use the SD Card though.

Use h2testw (for windows) to find out the true capacity and on the "Last block..." step during above resize operation enter a smaller value e.g. trying for approx 8gb resize...

Last sector, +sectors or +size{K,M,G,T,P} (143360-62521343, default 62521343): 15000000 (and press Enter)

Orange Pi(香橙派) Zero Debian 配置WIFI連接。

 建立一個新文件

nano /etc/network/interfaces.d/wlan0

插入如下内容(Ctrl+O保存,Ctrl+X退出)

allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp


建立一個新文件

nano /etc/wpa_supplicant/wpa_supplicant.conf

插入如下内容

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
ssid="WIFI-SSID"
psk="WIFI-密碼"
}


重新啟動香橙派,輸入ifconfig,如果看到wlan0有連接IP,說明WIFI已經順利連上網路

2022年8月8日 星期一

清酒飲用方法

最近訂購一瓶 月桂冠的大吟釀 英雄匠人系列,還找一下清酒喝法!!😆😆

樹莓派網路設定

  設定樹莓派的網路連線,主要可以分為有線(乙太網路) 和無線(Wi-Fi) 兩種方式。  無線網路設定通常需要編輯  wpa_supplicant.conf  檔案,設定Wi-Fi 的SSID 和密碼。  有線網路則可以設定靜態IP 或使用DHCP 。  無論哪種方式,設定完成...