# Start of filesystem resize task
aprx@OrangePi:~$ sudo fdisk /dev/mmcblk0
[sudo] password for aprx: (enter your user login password press Enter. user must be in sudo group see above.)
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): d
Partition number (1,2, default 2): 2
Partition 2 has been deleted.
Command (m for help): n
Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (2-4, default 2): (press Enter)
First sector (2048-62521343, default 2048): 143360
Last sector, +sectors or +size{K,M,G,T,P} (143360-62521343, default 62521343): (press Enter)
Created a new partition 2 of type 'Linux' and of size 29.8 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Re-reading the partition table failed.: Device or resource busy
The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8).
# Reboot to apply changes, ready for resize2fs
aprx@OrangePi:~$ sudo reboot
# Now grow/resize root filesystem. No reboot required.
aprx@OrangePi:~$ sudo resize2fs /dev/mmcblk0p2
[sudo] password for aprx: (enter your user login password press Enter. user must be in sudo group see above.)
resize2fs 1.42.13 (17-May-2015)
Filesystem at /dev/mmcblk0p2 is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 2
The filesystem on /dev/mmcblk0p2 is now 7797248 (4k) blocks long.
Your filesystem should now use all available space on sd card.
*A note on SD Cards with fake capacity.
This is rampant with online vendors, selling cheap micro SD Cards. You probably will not get a replacement.
If you ask for a replacement, they say a new genuine card is sent out but don't and wait out the buyer protection period, but you should try a refund.
In such cases the micro SD Card is only 8gb in capacity, or less. You can still use the SD Card though.
Use h2testw (for windows) to find out the true capacity and on the "Last block..." step during above resize operation enter a smaller value e.g. trying for approx 8gb resize...
Last sector, +sectors or +size{K,M,G,T,P} (143360-62521343, default 62521343): 15000000 (and press Enter)
沒有留言:
張貼留言